CloudV ElectroMini Temperature Controlled Portable E-nail!
The smallest and the most powerful portable e-nail has arrived. This perfected design has been finely tuned to deliver dabs quickly, safely and on-the-go! It features a fully temperature controlled system that allows you to choose your desired temperature from 550°F to 1000°F. You can easily adjust it using the responsive button which also serves as a digital display. Speedy heating up nails and powerful battery are all you need to enjoy the vaporization of our concentrates confidently anywhere!
3300mAh ElectroMini Battery
Spill-Proof Aqua Bubbler and Carb Tool
Cloud V Pro Tool
1 Quartz Nail
1 16mm Ti Nail
The ElectroMini has a 1.3" diameter and a 9" height. It has 3300mAh rechargeable battery capacity and quartz/titanium dish nails.
You can easily adjust the temperature from 550°F to 1000°F on your battery.
How does the CloudV ElectroMini work?
The ElectroMini is easy to use and maintain. Once unpackaged, it is recommended to charge your ElectroMini for at least 4 hours before the first use. This is important to condition the battery for its lifespan. Once fully charged, place the Aqua bubbler carefully on the battery. Make sure the glass is sitting tightly on the base. Press the power button 3 times in sequence to activate the device. The display will ask you to set the desired temperature. Using the left and right buttons on the display, you can adjust the temperature from 550°F to 1000°F. Once ready, you need to click the power button two times to activate the chosen temperature. Your display will show your nail temperature heating up and will stay on for 15 seconds until you complete the cycle. The next time you turn on the battery, it will remember the last chosen temperature setting.
How do you maintain the CloudV ElectroMini?
Cleaning is required to maintain the CloudV ElectroMini and make sure the performance is optimized for longer period of time. Before cleaning your Cloud, make sure it has not been used for at least 15 minutes.
Remove the Aqua Bubbler carefully with twisting motion as the glass could be tightly attached to the metal base after multiple use. Using glass cleaner and rubbing alcohol, thoroughly clean the bubbler to remove any residues.
Before getting in contact with the nail, make sure the device is not activated and the nail is not hot for at least 15 minutes. Using a protective glove, unscrew the nail from the base. Using rubbing alcohol, wipe the nail dish.
Use cleaning wipes to clean the metal base on the top of the battery. Remove any sticky residues from the base. Placing the aqua bubbler will be much easier when the unit is thoroughly wiped.
Do not insert anything into the opening of the device. If you are not going to use CloudV ElectroMini for extended period of time, you need to charge the battery every 2-3 weeks to sustain the life of the battery. You can charge the battery using the charging base or by connecting the charging cable directly to the bottom of the battery.
Keep the CloudV Tool clean at all times. Using cleaning wipes before and after each load. Cover with the lid to prevent the tip to get in contact with surrounding environment.